RAC Kettering are specialists in design and construction of Coldrooms and Coldstores,
in fact any area requiring temperature controlled foodsafe insulated panels and
doors normally associated with food, pharmaceutical and other hygiene related
industries.
Our technical advice and wealth of experience will ensure the most efficient and
cost effective insulation cores suitable for your project.
Insulated panel options
We are able to offer several types of insulation material to form the core of
the modular wall and ceiling panels. Factors to take into account when selecting
the ideal material for your requirements include wall height, ceiling span,
fire resistance requirements (if any), running temperature and budget.
1.Polystyrene
Panels are continuously laminated to length using a standard or high density,
fire retardent additive, CFC free core. Bond is formed using two part polyurethane
adhesive. Joints are formed using interlocking polystyrene splines.
2.Polyurethane
Panels have a press-injected, flame retarded closed cell core and are CFC free.
Jointing method is shallow tongue and groove and mechanical camlock.
3.Rockwool
Panels have an inert, non combustable mineral fibre core suitable for high fire-risk
areas as defined in the Loss Prevention Council Standard LPS 1208 and have been
tested to BS476: part 22. (75mm panel is 60 mins fire rated).
4.Polyisocyanurate( PIR )
Panels for use in high fire-risk areas as defined in the Loss Prevention Council
LPS 1208.Tested to BS476: part 22. (150mm panel is 30 mins fire rated).
Panel facings
Standard facing for food applications is flat or lightly ribbed 0.55mm, hot
dipped galvanised steel coated with foodsafe hard, white PVC. (class 1 surface
spread of flame and fire propogation test result which complies with the requirements
for a class '0' surface as defined in par A8(b) of approval document B 'fire'
UK building regs. 1985. Non critical areas finished in 0.55mm steel with primer
coat only. Other available facing materials include stainles steel, polyester
and HP200 colourcoat Glasboard (embosed F.R.P.) or 21mm aluminium '5 bar' sheeting
can be added to wall panels for impact protection.
Construction
Corner joints are rebated and foamed on site. All wall/ceiling joints are pre-rebated.
Internal corners finished with white angle as standard.Two-part hygiene coving
or easyclean can be fitted if preferred. For longceiling spans, panels can be
supported using 'top hat' ceiling suspension system connected to site steels
(if suitable).
Service and Maintenance
At RAC Kettering we realise the importance of providing a back-up service for
our customers, hence maintenance and repairs have become an important part of
our activities. Rather than view repair work as a nuisance as do many coldstore
contractors, we have gained a reputation for a prompt and efficient service.
This has resulted in our company being on the call list of many refrigeration
companies and high street names such as Mc Donalds and Hazlewood Foods. We carry
a large stock of refrigeration door furniture and ancillaries and any non standard
parts can be manufactured in our workshop. We have fitters dedicated just to
repairs.
We are able to offer a wide choice of door options to suit all temperature
and hygiene requirements. Choices include:
Insulated, Manual/automatic and sliding doors
Floors with heavy usage (such as forklift, pallet truck and racking) We recommend
a reinforced mono-granolithic (concrete) floor slab to BS8204 part 11 (code
of practace for insitu floors). Integral concrete kurbing can be fitted for
protection of walls. Low voltage underfloor frost-heave protection fitted to
freezer floors where required.
If you are looking for the coldroom ,
at Cold Store Room UK
your sure to find most of the sites you would probably want to visit for
the cheapest sites
for the coldroom .
|
